Oxnard · Masonry Services

Concrete Driveways, Pathways & Stairs in Oxnard

Poured concrete driveways, pathways, stairs, and slabs — broom, stamped, or colored finishes.

Concrete Driveways, Pathways & Stairs in Oxnard

Concrete · Oxnard

Concrete Done Right

Concrete flatwork for Oxnard homes — driveways, pathways, patios, stairs, and slabs. Broom finish, stamped, or integrally colored, poured over a compacted base with proper thickness and control joints so it lasts. We handle demo of the old slab, forming, pour, and finish.

How We Work

Site walk, design, permit, build. One crew chief from start to cleanup.

1. Layout and forming

We measure, mark the layout, set the grade for drainage, and build clean forms. Old concrete gets demoed and hauled out first.

2. Base and reinforcement

Compacted base, rebar or wire mesh sized to the load, and the right slab thickness — 4 inches for walkways, thicker for driveways.

3. Pour and finish

Pour, screed, float, and finish — broom, stamped, or troweled. Control joints cut to manage cracking, then cure. Cleanup and a walk-through.

When You Need Concrete

Poured concrete is the right call when:

  • You need a new driveway — durable, low-maintenance, and the most affordable way to cover a large area.
  • Your slab is cracked or sunken — a tear-out and repour fixes trip hazards and drainage problems for good.
  • You want stairs or a landing — poured concrete steps are solid, code-compliant, and last for decades.
  • You want a clean patio — stamped or colored concrete gives a finished look for less than pavers or stone.
  • You need a utility or shed slab — a flat, reinforced pad for a shed, AC unit, or workshop.
  • Drainage is a problem — we set the slope so water runs away from the house, not toward it.

Tell us the area and the look you want and we'll walk the site and lay out the pour. Call: 805-301-6837

When You Need Concrete

What Affects the Cost of Concrete

Concrete pricing is per square foot plus finish and prep. Depends on:

  • Square footage and thickness. Driveways need thicker, reinforced slabs than walkways, which raises the per-foot cost.
  • Finish. Broom finish is the value pick; stamped, colored, and exposed-aggregate finishes are premium.
  • Demolition. Tearing out and hauling an old slab adds to the scope.
  • Reinforcement. Rebar, wire mesh, and base depth scale with the load the slab will carry.
  • Site access and grading. Pump trucks, tight access, and re-grading for drainage add labor.
  • Permit. Driveway approaches and some structural slabs need an Oxnard permit — we handle it.

We'll quote square-foot pricing after the site walk — flat-rate, including forming, reinforcement, and cleanup.

Frequently Asked Questions

How long before I can use new concrete?

You can walk on it in 24–48 hours. Wait about 7 days before driving on a new driveway, and it reaches full strength at 28 days.

Why does concrete crack, and can you prevent it?

All concrete moves. We control where it cracks with properly spaced control joints, the right base, and correct slab thickness and reinforcement — so you don’t get random cracks across the surface.

Stamped or plain concrete?

Plain broom finish is the most affordable and very durable. Stamped and colored concrete mimics stone or brick for a high-end look at less than the cost of pavers. We’ll show you samples.

Can you match my existing concrete?

We can come close on color and finish, but new concrete always cures a slightly different shade than old. For a seamless look, we’ll talk through repouring adjoining sections.

Do you do concrete stairs?

Yes — poured, reinforced concrete steps and landings, built to code with proper rise and run, and finished to match the rest of your flatwork.

See all FAQs →

Planning masonry work in Oxnard?

Tell us the project — wall, fireplace, repair — and we'll come out for a free on-site walk and design.

Or call us now: 805-301-6837

Get a Free Quote

By submitting, you agree to be contacted about your project. We respect your privacy.