Oxnard · Masonry Services
Paver Patios, Driveways & Walkways in Oxnard
Interlocking and natural-stone pavers for patios, driveways, walkways, and pool decks.
Pavers · Oxnard
Pavers Done Right
Paver installation for Oxnard homes — patios, driveways, walkways, and pool decks in interlocking concrete or natural stone. We grade the base right, set every paver on a compacted foundation, and lock it in so it stays flat for decades. Hundreds of colors, shapes, and patterns to match your home.
How We Work
Site walk, design, permit, build. One crew chief from start to cleanup.
1. Design and material pick
We measure the area, talk through pattern and color, and bring paver samples to your home so you can see them in your own light.
2. Base and grading
The base is everything. We excavate, lay and compact road base, set the slope for drainage, and screed a clean sand bed before the first paver goes down.
3. Lay, cut, and lock
Pavers are laid to the pattern, edge-restrained, cut clean at the borders, then locked with polymeric sand and a final compaction. Cleanup and a walk-through.
When You Need Pavers
Pavers are the right call when:
- You want a patio that lasts — pavers flex with the ground instead of cracking like a poured slab.
- Your driveway is cracked or stained — a paver driveway looks high-end and handles vehicle weight when based correctly.
- You need a walkway or path — front walks, side yards, and garden paths in a pattern that matches the house.
- You’re building a pool deck — pavers stay cooler underfoot and are slip-resistant around water.
- You want easy repairs — a single damaged paver lifts out and swaps in; no patch line like concrete.
- You’re selling soon — paver hardscaping is a strong listing photo and a high-ROI upgrade.
We'll bring samples to the site so you can match the paver to your home before we break ground. Call: 805-301-6837
What Affects the Cost of Pavers
Paver pricing is per square foot plus base work. Depends on:
- Square footage. Cost scales with area — bigger jobs get a better per-foot rate.
- Paver type. Standard concrete pavers are the value pick; tumbled, large-format, and natural stone are premium.
- Base depth. Patios need less base than driveways, which carry vehicle loads and need a deeper, stronger foundation.
- Pattern and cuts. Herringbone, circle kits, and lots of border cuts add labor.
- Site prep. Removing an old slab, fixing drainage, or hauling out dirt adds to the scope.
- Access. Tight backyard access slows material delivery and adds labor.
We'll quote square-foot pricing after the site walk — flat-rate, including base, edge restraint, and cleanup.
Frequently Asked Questions
How long do pavers take to install in Oxnard?
Most patios and walkways are 3–7 days. Driveways and large projects run 1–2 weeks depending on base work and square footage.
Will pavers sink or shift over time?
Not when the base is done right. We excavate, compact road base, and edge-restrain every job — that’s what keeps pavers flat for decades. A bad base is why cheap paver jobs fail.
Are pavers better than poured concrete?
For most patios and driveways, yes — pavers flex with the ground instead of cracking, individual pavers are easy to replace, and the look is higher-end. Poured concrete is cheaper up front for simple flatwork.
Do I need a permit?
Most patios and walkways don’t. Driveway aprons that tie into the street and some drainage changes can require an Oxnard permit — we handle it if so.
How do I keep weeds out of the joints?
We finish every job with polymeric sand, which hardens in the joints to resist weeds and washout. A reseal every few years keeps it tight.
Planning masonry work in Oxnard?
Tell us the project — wall, fireplace, repair — and we'll come out for a free on-site walk and design.
Or call us now: 805-301-6837